PhosphatingofMetalsandMetallicGME00253
Coatings版本201103
金属或含金属的磷化通用标准
Introduction介绍
Phosphatingaccordingtothisspecificationshallbedefinedasthetreatmentofmetalswithacidicphosphatesolutions
inordertoproducesurfacecoatingsconsistingofmetallicphosphates.
根据本规范的规定，磷化应定义为用酸性磷酸盐溶液处理金属，以生产由金属磷酸盐组成的表面涂层。
Note:Nothinginthisstandardsupersedesapplicablelawsandregulations.
Note:IntheeventofaconflictbetweentheEnglishandthedomesticlanguage,theEnglishlanguageshalltake
precedence.
1.1Scope.Phosphatedcomponentsmadefromiron,zinc,aluminumandtheirrespectivealloys,alsocomponents
whichhavealreadybeencoatedwiththesemetalsandareintendedforuseaspre-treatmentfortheapplication
oflubricants.
范围。由铁、锌、铝和它们各自的合金制成的磷化部件，以及已经涂上这些金属的部件，用于润滑油的预处理。
1.2Mission/Theme.Thisspecificationdetailstherequirementsforphosphatedcomponentsmadefromiron,zinc,
aluminumandtheirrespectivealloys.Italsoincludescomponentswhichhavealreadybeencoatedwiththese
metalsandareintendedforuseaspre-treatmentfortheapplicationoflubricants,toimprovetheadhesionof
organiccoatingsandinconjunctionwithlubricantsforcoldformingoperationsandforresistancetowear,fretting
andscuffing.
任务/主题。本规范详细介绍了由铁、锌、铝和它们各自的合金制成的磷化部件的要求。
它还包括已经涂上这些金属的部件，用于润滑油的应用前处理，以提高有机涂料的附着力，并与润滑油一起用于冷
成型操作和抗磨损、微动和磨损。
1.3Classification.Notapplicable.分类不适用
2References参考文献
Note:Onlythelatestapprovedstandardsareapplicableunlessotherwisespecified.
注：除非另有说明，否则只适用最新批准的标准。
2.1ExternalStandards/Specifications.外部标准/规范
GMW3059ON202GME00150GME60209GMI60206
更改标记更改文件号更改内容